Cuplock Scaffold Systems manufactured
by us are made using best quality material. Cuplock scaffold systems are
used to support steel as well as timber form works. It’s Simple and
speedy erection makes it the most cost-effective and commonly used
scaffolding systems in the world. It can also be used for access work,
where the loading of Scaffolds is for light and heavy loading
applications like form work. There are no special skills required to
raise and dismantle the systems.
Benefits of Cup-Lock
- Strong
- Time saving in erection
- quick to assemble
- Simple
to erect
There are two types of cuplock scaffolds available i.e. verticals and
horizontal cuplock scaffolds.
Components & Features
The major components of this Scaffolding Systems are :
A 1. Verticals / Standards
- Material conforms IS-1161 -1998 OR IS -1239 Part I
- Pipes
40 NB (OD 48.3 mm) ERW Mild Steel Medium / Heavy Class
- The
connections point are set at every 500 mm vertical interval of Standard
Vertical member
- Top Cups are made out of Malleable Cast Iron.
- Bottom
cups are made out of M.S. Forging
- Ends are provided in vertical
member with 150 mm long spigot for continues connections.
- Vertical
are available in a standard sizes.
B 2. Horizontals / Ledger
- Material Conforms IS-1161 -1998 OR IS -1239 part I
- Pipes
40 NB (OD 48.3 mm) ERW Mild Street Light / Medium Class
- Ledger
blades are made out of M.S. Forging
- Horizontals are available in
a standard sizes
The principle feature of MSF, is the unique method of
connecting horizontal to verticals in one single action without the use
of nuts, bolts or wedges. The locking device is formed by two cups, a
fixed lower cup which is welded to verticals and a sliding upper cup is
moved down and rotated by hammer blow to give a positive and rigid
connection.
Benefits of Cup-Lock
Strong, Time saving in erection, quick to assemble, Simple to erect,
fully systemized, can eliminate tube and loose fittings, Confidence from
in-depth technical support.
Verticals
Cup-Lock vertical are provided in seven basic sizes with cup joints
welded at 500mm or 1000mm intervals. The captive mobile top cups are
malleable casting which endure rough site handling, whilst the fixed
bottom cups are pressed from high quality steel. Cuplock Vertical made
out of 48.3mm OD (40m NB) M.S Block pipe ERW 'Med' ISI Marked with
Malleable C.I. Top Cup and forged Bottom Cup @1000.
Horizontals
The Cup-Lock system utilizes a carefully selected range of sizes to meet
the varied demands of grids in general support of formwork. Many of
these can also be used for access structure. Each has forged. blade ends
with the minimum projection to resist site damage. Cuplock Horizontal
made out of 48.3mm OD (40m NB) M.S Block pipe ERW 'Med' with Ledger
Blades welded at both ends.
To enquire about the desired product(s), just check the box and then
click “Enquiry Now” button which is provided below.
